Armor-Hard Epoxy Kit w/Aggregate -Metzger/ McGuire, Dovetail Gray

Description

    Armor-Hard Concrete Repair EpoxyConcrete Floor Repair for Joints, Cracks, and Surface Defects Armor-Hard Kit is a concrete floor repair kit consisting of a two-component structural epoxy binder and a pre-measured bag of custom blended sand aggregate. When epoxy and aggregate are combined they produce a mortar that is easily worked and troweled. This is an early-set system designed specifically for the repair of industrial concrete floors subject to hard wheeled traffic. Related Products/Versions Armor-Hard is available in two primary versions: Armor-Hard Liquid or Kit – Early Set properties (faster than standard structural epoxies, slower than Extreme),use limited to temperatures of 50 ÌŠF +. Armor-Hard Extreme Liquid or Kit – Quick set properties, multiple temperature applications.  Typical Use As a mortar Spall repair/rebuilding of joint shoulders As a topping for delaminated slabs Fill in holes, gouges, ruts, pop outs Repair broken slab panel corners  Limitations: Should not be used in joints or cracks that move  For deep repairs install in 1” (25 mm) lifts to avoid shrinkage due to exotherm  Not for use as a surface coating  Should be installed at 50 ÌŠF (10 ÌŠC) or higher  Packaging Kit contains epoxy liquid (pre-measured “A” and “B” components in cans) and custom blended aggregate mix designed for smooth, easy troweling. One unit will yield approximately 540 cubic inches of mortar (approximately 2.35 gallons), enough to apply 15 sq. ft. of mortar 1/4” (6 mm) thick. Color: Armor-Hard epoxy is clear/amber in color and will take on the color of the aggregate blend. The Armor-Hard Kit is available in two colors; Natural and Gray. Advantages: Early set allows for:- Pedestrian/construction traffic in 3-4 hours. Grinding/sanding in 3-4 hour- Hard wheeled traffic in 8 hrs. or less (at 70 ÌŠF) Requires no separate primer USDA/FDA acceptable Superior impact, wear and chemical resistance Excellent abrasion resistance Very low odor once blended Armor-Hard must be shipped freight due to contents